GN613 Indexing Plungers Without Head

Type A without lock nut, with knob

Type AK with lock nut, with lifting knob

Type AN without lock nut, with Stainless Steel knob

Type AKN with lock nut, with Stainless Steel lifting knob

Type G without lock nut, with threaded rod

Type GK with lock nut, with threaded rod

Please Select Values

Indexing plungers GN613 are a low cost alternative with much reduced dimensions.

Type G or GK with threaded plunger end are for applications where a special knob to customers' own design is required or for such cases where the spindle is linked direct to an operating mechanism.

When being in the end position (spring is "on bloch") the indexing plungers are constructed in such a way that also axial loads can be applied. For applications, however, where the loads applied through the operator via knob are higher (Type G) additional informations can be submitted on request.

A special screw driver GN613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

Stainless Steel NI, German Material No. 1.4305, Plunger, chemically nickel plated, Knob, Type A / AK, Plastic(Polyamide PA), black matt finish, not removable, Knob, Type AN / AKN, Stainless Steel, German Material No. 1.4305, not removable.