GN615.7 Spring Plungers With Limit Switch

Type S Normally open

Type O Normally closed

Please Select Values

Spring plungers GN615.7 are used for end stops as well as contacts.

Simultaneously an electrical control signal can be released from the built-in limit switch.

Attention:
If the screw-in thread is earthed the blue cable has to be connected to the mass.

Screw, Steel, nickel plated, Ball, Steel, hardened, Hexagon nuts, Steel, nickel plated, End limit switch, Voltage: 12 ÷ 24 V DC, Switching load recom: 5 - 10 mA, Switching load:20 mA DC max. Life expectancy:, 3 millions operations, Temperature range:, -10 C to +80 C, Protection classification : IP 40, Supply cable, Ø 3; 2 phase, ~ 2 meters long, max. tensile load 20 N, grey for type S (normally open), black for type O (normally closed).