Quick Links

Select & Buy
Price Info
Jump to Photo
Product PDF

GN343.2 Levelling Feet

Type OS without plastic cap
Type KS with plastic cap, gliding
Type KR with plastic cap, non-gliding

Please Select Values

The static load of the levelling feet GN343.2 is limited by the load capacity of the stud (tensile strength 500 N/mm2).

The static load values in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.

For higher loads levelling feet GN 343.1 should be used in conjunction with screws of higher tensile strength. We recommend DIN 915 threaded studding with pressure pad. This pressure pad must be seated squarely at the bottom of the threaded hole, which will increase the load capacity of the ball in the socket.

Otherwise the load values apply only to types OS and KS.

Steel
Tensile strength 500 N/mm2, zinc plated, blue passivated

Plastic caps:

Type KS
Technopolymer Polyacetal (POM) cream white RAL 9001

Type KR
Thermoplastic rubber (TPE), 73 Shore hardness, black

Hexagon nut ISO 4032
Steel zinc plated, blue passivated