Quick Links

Select & Buy
Price Info
Jump to Photo

Download DXF

GN343.5 Levelling Feet Stainless Steel

Type OS without plastic cap
Type KS with plastic cap, gliding
Type KR with plastic cap, non-gliding

Please Select Values

The static load of the levelling feet GN343.5 is limited by the load capacity of the ball socket (German Material No. 1.4305).

The static load values in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.

For higher loads levelling feet GN343.5 should be used in conjunction with screws of higher tensile strength. We recommend DIN 915 threaded studding with pressure pad. This pressure pad must be seated squarely at the bottom of the threaded hole, which will increase the load capacity of the ball in the socket.

Otherwise the load values apply only to types OS and KS.

Stainless Steel
German Material No. 1.4305 fine turned

Plastic caps:

Type KS
Technopolymer Polyacetal (POM) creamwhite RAL 9001

Type KR
Thermoplastic rubber (TPE) 73 Shore hardness, black

Hexagon nut ISO 4032
Steel zinc plated