< Previous Product Next Product >
GN345.6 Levelling Foot, Stainless Steel with Two Fixing Holes
Type A - without nut, without rubber underlay
Type B - with nut, without rubber underlay
Type AG - without nut, with rubber underlay
Type BG - with nut, with rubber underlay
material properties of elastomeres rubber .pdf
operating instruction gn 345-gn 345.5.pdf
Catalogue Technical Specification
2D/3D Cad Files
2D/3D Cad Files
GN 345.6 Levelling Foot, Stainless Steel with Two Fixing Holes (German catalogue reference GN345.5)
Stainless steel levelling feet, GN345.6, have a slightly stepped base which gives them a good looking, easy to clean shape.
These levelling feet are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.
The fixing holes are closed by a thin plastic layer, which may be easily punctured.
Levelling feet GN345.6 are supplied assembled, but are removable.
The values given in the table regarding the static load capacity serve as a guide line only and if these are exceeded serious permanent deformation or breakage of the plastic socket could occur.The values have been arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet. The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.
Foot - Plastic ,Technopolymer (Polyamide PA) glass fibre reinforced, black, matt. Temperature resistant up to 100° C
Threaded stud - Stainless Steel AISI 303
Hexagon nut ISO4032 - Stainless Steel AISI 304
Rubber underlay - NBR, 70 Shore A, black