Type A - Mounting from the back (threaded blind bore)
Type B - Mounting from the operator's side
GN426.6 Stainless Steel-Cabinet "U" handle
Stainless Steel-Cabinet "U" handle, GN426.6, can be mounted from the back (type A) as well as from the operator’s side (type B). In this case the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw.
Both mounting methods allow the mounting of a pair of handles in opposite positions. This method could be used e.g. on doors (double handle). In general, a mounting stud with special length l2 might be required.
Stainless Steel NI, AISI 304, matte shot-blasted.
d1 = 20: Solid material
d1 = 28: Tube-Ø 28 x 2
Threaded bush / Mounting stud - Stainless Steel NI, AISI 303
Grub screw (Type B)
d1 = 20: DIN 914-M5-6-NI
d1 = 28: DIN 914-M6-8-NI
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.