DIN582 Lifting Eye Nut, Stainless Steel, Drop Forged, A2
These lifting eye nuts are strong and robust, and correspond to standard sheet DIN 582 (version 2003-08).
The following guidelines have to be observed in addition to the load values given in the table.
The eye nut must be of fully screwed in to achieve a perfect contact between the two mating faces.
Both threads must be of an equal length and the base material of equal strength to that of the nut.
With a side pulling angle of > 45, lifting eye bolts must not be used.
Operating instructions with more details and specifications are included on delivery.
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 and M100 x 6.
Stainless Steel, NI, A2, drop forged, contact face machined.