Press Tool Standard Parts > Die Springs & Gas Springs > Nitrogen Gas Springs
Press Tool Standard Parts > Die Springs & Gas Springs > Nitrogen Gas Springs > Gas Spring Accessories
< Previous Product Next Product >

Accessories

A full range of useful accessories for our nitrogen gas springs, including adapters, hoses & couplings. Click the links or scroll down for further information.

Hardened Counter Plate - 49 to 52 HRC

Hardened Thrust Pads - 49 to 52 HRC

Pressure Switch with a maximum operating voltage of 48v

Accessory - 39DMA - Device for checking, decreasing/increasing pressure or pressurising self contained cylinders or hosed systems.

Accessory - 39DMCILA - Pressure limitation/discharging valve included in the 39DMA set

Accessory - 39DMCPVA - 3 metre high pressure hose

Accessory - 39IR01A - Female Coupling device for 39DMCPVA

Accessory - 39IRFA - Female Coupling device for 39DMCPV

Cejin male quick fit adapter for direct charging

Accessory - ADM - Adapter for 39DMCILA

Accessory - DDS - Discharging Device

Accessory - Code 47T - Connecting hose

Accessory - Code 39RP- Pressure Reducer

Accessory - Code - CMC - Full set

Accessory - Code - CMCT - Tool set only

Accessory - Code - CMC-... - Specific tool st for cylinders

Accessory - Code - 39PM02A - Manual table press

Tech Spec:

Counter Plate - Hardened

49 - 52 HRC

images/300/Accessories_code_49-52_HRC__1__W.png

CODE		A		B		C		D		D1		E		E1		F
Phasing out	New	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch
PS040040	39PA040040A	40	1,57	40	1,57	15	0,59	15	0,59	9	0,35	21	0,83	21	0,83	10	0,39	d ≤ 20	,79
-	39PAB040040A	40	1,57	40	1,57	12	0,47	11	0,43	7	0,28	24	0,94	24	0,94	7	0,28	d ≤ 20	,79
-	39PAA040040A	40	1,57	40	1,57	15	0,59	11	0,43	7	0,28	24	0,94	24	0,94	7	0,28	d ≤ 20	,79
PS056056	39PA056056A	56	2,20	56	2,20	20	0,79	18	0,71	11	0,43	32	1,26	32	1,26	13	0,51	d ≤ 36	1,42
-	39PA060060A	60	2,36	60	2,36	15	0,59	15	0,59	9	0,35	40	1,57	40	1,57	9	0,35	d ≤ 36	1,42
-	39PAA060060A	60	2,36	60	2,36	12	0,47	14	0,55	9	0,35	38	1,50	38	1,50	9	0,35	d ≤ 36	1,42
-	39PA070070A	70	2,76	70	2,76	15	0,59	15	0,59	9	0,35	50	1,97	50	1,97	9	0,35	d ≤ 60	2,36
PS071071	39PA071071A	71	2,80	71	2,80	20	0,79	18	0,71	11	0,43	48	1,89	48	1,89	13	0,51	d ≤ 60	2,36
-	39PA080080A	80	3,15	80	3,15	16	0,63	15	0,59	9	0,35	0	2,44	0	0	10	0,39	d ≤ 65	2,56
-	39PAB090090A	90	3,54	90	3,54	12	0,47	15	0,59	9	0,35	64	2,52	64	2,52	9	0,35	d ≤ 80	3,15
-	39PAA090090A	90	3,54	90	3,54	15	0,59	15	0,59	9	0,35	70	2,76	70	2,76	9	0,35	d ≤ 80	3,15
-	39PA090090A	90	3,54	90	3,54	20	0,79	18	0,71	11	0,43	67	2,64	67	2,64	13	0,51	d ≤ 80	3,15
-	39PAC090090A	90	3,54	90	3,54	12	0,47	14	0,55	9	0,35	70	2,76	70	2,76	9	0,35	d ≤ 80	3,15
-	39PA100100A	100	3,94	100	3,94	16	0,63	15	0,59	9	0,35	0	3,23	0	0	10	0,39	d ≤ 90	3,54
-	39PAA100100A	100	3,94	100	3,94	20	0,79	18	0,71	11	0,43	74	2,91	74	2,91	11	0,43	d ≤ 90	3,54
-	39PAB100100A	100	3,94	100	3,94	12	0,47	14	0,55	9	0,35	81	3,19	81	3,19	9	0,35	d ≤ 90	3,54
-	39PAA140140A	140	5,51	140	5,51	20	0,79	18	0,71	11	0,43	110	4,33	110	4,33	11	0,43	d ≤ 130	5,12
-	39PA140140A	140	5,51	40	5,51	20	0,79	18	0,71	11	0,43	110	4,33	110	4,33	13	0,51	d ≤ 130	5,12
PS050025	39PA050025A	50	1,97	25	0,98	12	0,47	11	0,43	7	0,28	8	0,31	8	0,31	8	0,31	d ≤ 15	,59
-	39PA050030A	50	1,97	30	1,18	12	0,47	11	0,43	7	0,28	14	0,55	14	0,55	8	0,31	d ≤ 20	,79
PS055030	39PA055030A	55	2,17	30	1,18	12	0,47	11	0,43	7	0,28	14	0,55	14	0,55	8	0,31	d ≤ 20	,79
-	39PA055032A	55	2,17	32	1,26	16	0,63	15	0,59	9	0,35	0	0	0	0	10	0,39	d ≤ 20	,79
-	39PA065050A	65	2,56	50	1,97	16	0,63	15	0,59	9	0,35	0	0	0	0	10	0,39	d ≤ 36	1,42
PS070035	39PA070035A	70	2,76	35	1,38	15	0,59	15	0,59	9	0,35	14	0,55	14	0,55	10	0,39	d ≤ 30	1,18
PS075050	39PA075050A	75	2,95	50	1,97	15	0,59	15	0,59	9	0,35	30	1,18	30	1,18	10	0,39	d ≤ 36	1,42
-	39PA080060A	80	3,15	60	2,36	16	0,63	15	0,59	9	0,35	0	0	0	0	10	0,39	d ≤ 55	2,17
-	39PAA085060A	85	3,35	60	2,36	15	0,59	15	0,59	9	0,35	40	1,57	40	1,57	10	0,39	d ≤ 55	2,17
PS0855860	39PA085060A	85	3,35	60	2,36	15	0,59	15	0,59	9	0,35	40	1,57	40	1,57	10	0,39	d ≤ 55	2,17
PS100080	39PA100080A	100	3,94	80	3,15	20	0,79	18	0,71	11	0,43	56	2,20	56	2,20	12	0,47	d ≤ 70	2,76
PS110100	39PA110100A	110	4,33	100	3,94	20	0,79	18	0,71	11	0,43	75	2,95	75	2,95	12	0,47	d≤ 100	3,94

Counter Plate - Hardened

49 - 52 HRC

images/300/Accessories_code_49-52_HRC__2__W.png

CODE	R		B		C		D		E		F
CODE	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch
39PA050A	25	0,98	21	0,83	15	0,59	10	0,39	9	0,35	15	0,59	d ≤ 15	0,59
39PA070A	35	1,38	32	1,26	20	0,79	13	0,51	11	0,43	18	0,71	d ≤ 25	0,98
39PA094A	47	1,85	48	1,89	20	0,79	13	0,51	11	0,43	18	0,71	d ≤ 50	1,97

CODE	A		B		C		D		E		F
CODE	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch
39PA098A	12	0,47	20	0,79	98	3,86	73	2,87	20	0,79	13,5	0,53		1,97
39PA113A	12	0,47	20	0,79	113	4,45	88	3,49	20	0,79	13,5	0,53		2,58
39PA128A	12	0,47	20	0,79	128	5,04	103	4,06	20	0,79	13,5	0,53		3,15
39PA143A	12	0,47	20	0,79	143	5,63	118	4,65	20	0,79	13,5	0,53		3,74

Thrust Plates - hardened

49 - 52 HRC

images/300/Accessories_code_49-52_HRC__3__W.png

Pressure Switch - Operating voltage 48 V max - normally opened

images/300/Accessories_preesure_switch_1_W.png

images/300/Accessories_pressure_switch_2_W.png

CODE	A	RANGE
PMM150A	1/8 " BSPT	50:150 bar
PMM300A	1/8 " BSPT	50:300 bar
PMM150A01	1/4 " BSPT	50:150 bar
PMM300A01	1/4 " BSPT	50:300 bar

DM multi device

Designed and built for checking, decreasing/increasing pressure or pressurising self contained cylinders or hosed systems.

images/300/Accessories_code_39DMA_W.png

39DMA includes
No. 1	39DMCILA	No. 1	ADM02	No. 1	ADM05	No. 1	ADMO9
No. 1	39DMCPVA	No. 1	ADM03	No. 1	ADM06	No. 1	Declearation of CE conformity
No. 1	ADM01	No. 1	ADM04	No. 1	ADM08	No. 1	Instruction folder

0 - 315 bar gauge

bar gauge - 2 hand grips - discharging valve - G1/8" built in adapter - quick fit male Cegn - included in the cod. 39DMA set.

images/300/Accessories_code_39DMCILA_W.png

Pressure Hose

3m high pressure hose - female Cejin quick-fit - ON/OFF valve - hose release valve - 1 1/2 - 20 UNF coupling for pressure regulator/tank + additional quick coupling (ONLY FOR CPVB - CPVD) included in the cod. 39DMA set.

images/300/Accessories_Code_39dmcpva_W.png

Quick female ISO coupling

images/300/Accessories_Code_39IR01A_W.png

Quick female Cejn coupling

images/300/Accessories_Code_39IRFA_W.png

Cejin male quick fit adapter for direct charging

images/300/Accessories_Code_39QDFV01_W.png

ADM

images/300/Accessories_Code_ADM_W.png

CODE	ADM01	ADM02	ADM03	ADM04	ADM05	ADM06	ADM08	ADM09	Directly with 39DMA
A	G1/8"	M6	M6	M6	M6	M6	M6	M6	G 1/8"
Model	ML1800-12000	HR300 Cu 5-16 HR500 Cu 5-16 HR700 Cu 10-16 HRF700 Cu 10-16 ML500 ML1000 Ll400 Cu 13	NE16, NE24 (rev A) HR1000-4200 HRF1000 Ll900-2000	SC150, SC250 SCF250, H300 H500, HF500 HR500 Cu 25-125 HR700 C 19-125 HRF500 Cu 25-125 HRF700 Cu 19-125 Li400 Cu 25-100	K40 ML300	HR200 MCS19 MCS19-TBM MCS19-TBI MCS19-TEM MCS25	NE16-NE24 (rev B) M90-MS90 M90 TBM - TBI - TEM M200-MS200 M300 KE400-7500 RV170-2400 RS170-2400 SC150-250 (rev D) H300-500 (rev C) ML300 (rev B+C)	ML500-1000 (rev B+C)	SC500-100000 SCF500-750 H700-18500 HF700-1000 HR6600-11800 Ll3200 LS1500-9500 KE12000-18500 S500-S3000 RV4200-RS9500 RF750-RF2400 RS4200-RS9500 RF750-RF2400 RG750-RG6600 RT350-RT9500 ML1800-ML12000(rev B+C)
	39QDFV01	39QDFV03	39QDFV02	39QDFV03	39QDFV02	39QDFV02	39QDFV02	39QDFV03	39QDFV01

Discharging Adapters

images/300/Accessories_Code_DDS_W.png

CODE	DDS-M6/1	DDS-M6/2	DDS-M6/3	DDS-1/8G1	DDS-1/8G
A	M6	M6	M6	G 1/8"	G 1/8"
MODEL	MCS, K, ML (rev.A), HR, LI	NE(rev.A), SC, H, HR, LI	NE9rev.B), M, MS, KE, ML (rev.B+C), RV, RS, SC (rev.D), H (rev.C)	K, ML (rev.A)	SC, H, HR, LI, LS, KE, ML (rev.B), S, RV, RS, RF, RT, RG

Connecting hoses between pressure regulator and nitrogen tank

images/300/Accessories_Code_47TB_1_W.png images/300/accesory_page_connecting_hose_image_8_W.png

CODE	IMG	Y	X	COUNTRY
47TB	1	1/4" BSP	W 21, 7 x 1/14" - Male - UNI 4409	Italy
47TB01	2	1/4" BSP	-	China - Korea
47TB02	3	1/4" BSP	14 G 7/16" - Male	Japan - Indonesia
47TB03	4	1/4" BSP	W24, 32x1/14" - Female - DIN 477 - 10 N2	Germany
47TB04	5	1/4" BSP	MFE29 - 650 CXR133 - Female	France
47TB05	6	1/4" BSP	W 21,7x1/14" - Male	India
47TB06	7	1/4" BSB	G 3/4"	Russia
47TB07	8	1/4" BSB	W 24,5X1/14" - Male (USA
47TB08	9	1/4" BSB	W 26,41X1/14" - Male (	USA

Pressure reducer complete with cylinder connection to control and reduce the pressure

images/300/Accessories_code_39RP_W.png

CODE	Pressure Reducer + Connection	COUNTRY
39RP	39RP + 47TB	Italy
39RP01	39RP + 47TB01	China - Korea
39RP02	39RP + 47TB02	Japan - Indonesia
39RP03	39RP + 47TB03	Germany
39RP04	39RP + 47TB04	France
39RP05	39RP + 47TB05	India
39RP06	39RP + 47TB06	Russia

Nitrogen cylinder assembly and disassembly set

images/300/Accessories_page_code_CMC_W.png

CMC = Full set

CMCT = Tool set only

CMC-... = Set of accessories for specific family of cylinders.

39PM02A = Table manual press for assembly of piston-rod, assembled bushing and retaining C-ring

Warning plate

images/300/Accessories_page_code_Warning_Plate_W.png

Advice plate - Code 39TAR-GB

Wheeled booster

Wheeled booster for the filling of large volumes of nitrogen, with electo-hydraulic start-up for the maximum speed

images/300/Accessories_page_code_Wheeled_Booster_W.png

1. Booster unit
2. Connection for bottle
3. Pressure reducer - not included
4. Charging device DMA - not included
5. Connecting hose from the bottle to the valve discharging

Features

Maximum safety, low charging time
Automatic stop when the set pressure is reached
Light indicator of cycle end
Safety valve for over pressure
Electric pump
Adjustable output pressure
Wheeled cart with N2 bottle housing
To be used with charging set DMA (optional)

The supply includes

Booster unit
3 metre hose for connecting the bottle or pressure reducer + bottle connection

Portable booster

Compact portable booster for the filling of nitrogen, with pneumatic start-up

images/300/Accessories_page_code_Compact_booster_W.png

1. Booster unit
2. Safety valve and air inlet
3. Connecting hose from the bottle to the valve discharging
4. Connection for bottle
5. Charging device DMA - not included
6. Pressure reducer - not included

Features

Compact, light and portable.
Max use of the nitrogen bottle N2
Direct installation on the N2 bottle
Safety N2 output valve max 220 bar

The supply includes

Booster unit provided with safety valve
Bottle support
1 metre hose for connecting the bottle or pressure reducer + bottle connection

Digital force tester

images/300/Accessories_page_code_FT7500_W.png

CODE	F0		Ø		L		Cu
CODE	daN	lb	mm	inch	mm	inch	mm	inch
FT500	0 ÷ 500	0 ÷ 1124	12 ÷ 120	0,47 ÷ 4,72	40 ÷ 400	1,57 ÷ 15,75	5 ÷ 125	0,20 ÷4,92
FT7500	0 ÷ 7500	0 ÷ 16861	12 ÷ 120	0,47 ÷ 4,72	40 ÷ 400	1,57 ÷ 15,75	5 ÷ 125	0,20 ÷4,92

Digital force tester

images/300/Accessories_page_code_IPC_DIG._W.png

	MIN.	MAX.
F0	0 daN	20,000 daN
Ø	12 mm	195 mm
L	40 mm	760 mm
Cu	5 mm	300 mm

BERGER TOOLS LTD

Accessories

Select Values to Buy:

Tech Spec:

Counter Plate - Hardened

Counter Plate - Hardened

Thrust Plates - hardened

Pressure Switch - Operating voltage 48 V max - normally opened

DM multi device

0 - 315 bar gauge

Pressure Hose

Quick female ISO coupling

Quick female Cejn coupling

Cejin male quick fit adapter for direct charging

ADM

Discharging Adapters

Connecting hoses between pressure regulator and nitrogen tank

Pressure reducer complete with cylinder connection to control and reduce the pressure

Nitrogen cylinder assembly and disassembly set

Warning plate

Wheeled booster

Portable booster

Digital force tester

Digital force tester