Type E - with rubber stop, locking device in back
Id no. 3 - Fastening using through-holes on external slide and countersunk holes on inner slide
GN1404 Telescopic Slides, Partial Extension, Load Capacity up to 780N
Telescopic slides GN 1404 are installed vertically and in pairs. The stroke reaches approximately 75 % of the nominal length l1 (partial extension). The rubber stops of type E dampen the impact of the slide in the two end positions and takes on the locking function of the back stop position. This feature is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements.
The telescopic slides are delivered in pairs. They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach without auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.
Slide profile - Steel, zinc plated, blue passivated ZB
Bearings - Roller bearing steel, hardened
Ball cage - Steel, zinc plated
Rubber stop - Plastic / Elastomer
Operating temperature -20 °C to 100 °C