GN820.2 Horizontal Clamp Zinc Plated, for Side Mounting

Choose your Part

Please select desired options to reveal part number, price and availability

Options

Type MF - U bar version with two flanged washers.

Type MFC - U-bar version, with two flanged washers and GN708.1 Spindle Assembly

Product Description

GN 820.2 Horizontal Clamp Zinc Plated, for Side Mounting

These horizontal acting toggle clamps GN 820.2 work according to the toggle principle: lever and clamping bar move in the opposite direction.

They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position. The 90° rotated mounting surface allows space-saving installation in addition to the clamping point. They are designed to ensure that, when opening, the operators fingers are not trapped between the clamping lever and the clamping arm (safety distance).

Horizontal acting toggle clamps in the U-bar version with two flanged washers (Type MF) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type MFC (GN708.1).

Stepped side washers are included.

Compatible with GN708.1 clamping bolt, with rubber tip. 

Specification

Steel, case-hardened, C10, zinc plated, blue passivated

Bearing pins - tempered

Bearing rivets (for size 355 and over) - case hardened

All moving parts - lubricated with special grease

Hand grip - High quality, oil resistant, red plastic

Type MFC - spindle assembly GN708.1 , Type A, steel, zinc plated, rubber tip 85 Shore A

Also available as GN820.2, Stainless Steel