Type APV3 - U-bar version, with two flanged washers
Type CPV3 - U-bar version, with two flanged washers and GN708.1 Spindle Assembly
Type EPV3 - Solid bar version, with clasp
GN862 Pneumatically Operated Clamp, Angle Mount
The clamping principle of GN 862 pneumatic toggle clamps is identical in construction and dimensions to the manually operated GN812 vertical toggle clamps. A special feature of these pneumatically operated clamps is that they can be mounted in two different planes.
To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar.
Also available with magnetic piston, GN862, in all sizes over 200. In conjunction with a GN896.2 proximity switch, the piston position can be sensed and the generated impulse can be used to transmit an electrical signal.
Parts in sheet metal - Case-hardened Steel ST C10, zinc plated, blue passivated.
Bearing pins - Hardened.
Bearing rivets - Case-hardened.
Air cylinder bearing pins - Case-hardened.
Double-action air cylinder - Max. pressure 6 bar.
All moving parts lubricated with special grease.
Spindle assembly GN708.1, type A - Steel ST, zinc plated, Rubber tip 85 Shore A.
Spindle assemblies GN708.1
GN801 Clamp mounts for toggle clamps (for type APV3)
GN809 Clamp mounts for toggle clamps (for type EPV3)
GN896.2 Proximity switch