Identification 2 - with 2 clamping screw DIN 912, stainless steel
GN147.1 Linear Actuator Connector, Aluminium
Linear actuator connectors GN 147.1 are normally supplied mounted in connection with a square linear actuator and for function control.
The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play.
This can be adjusted in one direction using the clamping screws. In the other direction (at 90°), a defined minimum play can be achieved only by appropriate machining (special design) of the square linear actuator connector.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN911
Aluminium, plastic coated, black SW RAL 9005, textured finish
Clamping square not machined
Socket cap screws DIN912 - Stainless Steel AISI 304
Hexagon nuts DIN985 - Stainless Steel AISI 304
Clamping kits GN911
Linear actuator connectors with reduced play