Standard Machine Elements > Guides, Spindles, Ball Rollers, Slide Units, Guide Rails & Linear Actuators > Linear Actuators / Linear Actuator Connectors
< Previous Product Next Product >
GN132.1 Linear Actuator Connector, for Single Axis System
Identification No. 2 - with 2 clamping screws DIN912 stainless steel
GN132.1 Linear Actuator Connector, Aluminium, for Single Axis System
Linear actuator connectors GN132.1 are normally supplied only in connection with a mounted actuator and for function control.
By means of the clamping screw on the sliding bore d1 / d2 the movement can either be set or the slider can be clamped (after setting of final adjustment).
The standard clamping bolts are socket cap screws DIN912. They can be used in place of adjustable clamping levers GN911 (see table of dimensions).
Aluminium, plastic coated, black, RAL 9005, textured finish SW, textured finish
Clamping bores machined
Sliding bush insert Polyamide
Socket cap screws DIN912, Steel zinc plated / St. Steel NI AISI 304
Hexagon nuts DIN985, Steel zinc plated / St. Steel NI AISI 304
Adjustable clamping lever GN911 Zinc die casting
Inserts / Distance bushings, Stainless Steel NI AISI 303