Type SW - Black, textured finish
Identification No.2 - with 4 clamping screws DIN 912, stainless steel
GN134.1 Linear Actuator Connectors, Aluminium
The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN911
Aluminium, plastic coated, black SW RAL 9005 , textured finish
Clamping square not machined
Socket cap screws DIN912, Steel zinc plated / Stainless Steel NI AISI 304
Hexagon nuts DIN985, Steel zinc plated / Stainless Steel NI AISI 304
Clamping kit GN911
Other bore and square combinations