rack_gb

7 • Counter 5 digit counter with reset function.. • BDC micrometric adjustment Bottom dead center adjustment system, graduated after every 0.02mm. • Anvil stakes Set of 2 anvil stakes for securing the tools in T slots. • Collet Collet chuck with ER25 collet for Ø1.5 to Ø16 mm shank (Ø to be selected). •Quality control by force and/or displacement sensors EMG proposes management solutions regarding force and/or displacement thanks to its force and displacement sensor solutions which can be adapted as per the requirement for a 100% control. • Non return system Non return system : does not release the lever until the end of travel (ensures complete and repeatable execution of the operation). Working stroke : from 0 to 70 mm for 3HR press, from 0 to 83 mm for 4HR press. •Capstan: travel + 100 mm, clear height increased For bigger parts, possibility to increase the 100 mm travel (on the 4HR model), change the column to increase the clear height and replace the level by a 3-arm capstan. 4HR press with 200mm travel, clear height +600 mm and 3-arm capstan. •Press version zinc/nickel plating Laboratory press fully zinc- plated and/or nickel-plated. These treatments are most commonly used in the world of anti-corrosion. It is to take advantage of their exceptional properties to protect a part against external aggressions. Ideal for using the press in "salt mist" environments or to avoid pollution in a laboratory by painting and/or standard lubricating of our machines. Additional options • On request: special bores, press head only. • Special RAL paint. • Locking of the press head on the column for rotation. • Engage the press when in position and release by lever. • Special services on request (press modifications, small tooling and fitting). > Options F O R C E M A N A G E M E N T S e e p a g e s 3 2 - 3 3 S P E C I A L S E R V I C E S S e e p a g e s 3 0 - 3 1 General Catalog - Presses EMG