Please select desired options to reveal part number, price and availability
Options
Type A - Pneumatically single-acting, retract by spring force
Type D - Pneumatically double-acting, protrude / retract
Type E - Pneumatically single-acting, protrude by spring force
Coding OP - Without position query
Coding BS0.4 - Position query on both sides, with plug, cable 0.4m
Product Description
GN817.7 Indexing Plungers, Pneumatically Operated, Stainless Steel
Stainless steel indexing plungers GN 817.7, with pneumatic operation, can be easily and securely integrated into automated processes and can be positioned at locations where hand operation of the indexing plunger is not possible. Thanks to the material used, the indexing plungers are also suitable for more aggressive environments.
An integrated magnet allows the plunger pin position to be queried electronically by a sensor. The end limits (protruding and retracted position) are taught-in via the operating element on the sensor cable. They each send a high signal, which is indicated by the respective LED and can be processed by a machine control, for example.
The sensor electronics can also be accessed via IO-Link and offer the ability to set and read out the switching points and to block the teach button on the operating element. To avoid interference, no external magnetic fields should act on the indexing plunger. The pneumatic indexing plungers are supplied with a lock nut. With coding BS0,4, the sensor, sensor clip and an allen wrench are also supplied loose.
Specification
Stainless steel AISI 303 - Plunger pin surface hardened
Rod seal - Polyurethane (PUR)
Piston seal and O-ring - Acrylonitrile butadiene rubber (NBR)
Magnet - Neodymium, iron, boron (NdFeB)
Sensor Housing - Polyamide (PA), black
Sensor Cable and plug - Outer sheath polyurethane (PUR), black
Sensor clip - Polyacetal (POM), black
Lock nut ISO 8675 - Stainless steel, AISI 304
Accessory
Cable with Connector GN330
CAD Viewer
Technical Data