Standard_Parts_Catalogue

Page 1077 | 3.2 Mounting, Positioning, Leveling with Screws, Clamping and Supporting Elements 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 Slotted locknuts GN 1804.2 with thread locking can be secured against twisting by twisting off the threaded shaft via a d 4 set screw. The thread flanks of the nut ensure damage-free securing and can be used as often as needed. The d 3 offset plane surface is intended as an axial contact surface. Information 1 d 1 2 Materíal How to order 1 2 GN1804.2-M20x1,5-ST • Nut Steel ST - - Property class 5 - - Blackened • Set screw Steel, blackened • Strength Values of Nuts → Page 2152 • RoHS Specification 2 • C-Spanner DIN 1810 (Code no. see table) Accessory 1 d 1 d 2 d 3 d 4 b h Code no. C-Spanner M 12 x 1,5 28 23 M 4 5  6 DIN 1810-A25-28 M 14 x 1,5 30 25 M 4 5  7 DIN 1810-A30-32 M 16 x 1,5 32 27 M 5 5  7 DIN 1810-A30-32 M 18 x 1,5 34 28 M 5 6  8 DIN 1810-A34-36 M 20 x 1,5 36 30 M 5 6  8 DIN 1810-A34-36 M 22 x 1,5 40 34 M 5 6  9 DIN 1810-A40-42 M 24 x 1,5 42 36 M 5 6  9 DIN 1810-A40-42 M 30 x 1,5 50 43 M 5 7 10 DIN 1810-A45-50 M 35 x 1,5 55 48 M 6 7 11 DIN 1810-A52-55 M 40 x 1,5 62 54 M 8 8 12 DIN 1810-A58-62 GN 1804.2 Slotted Locknuts with Thread Locking