Standard_Parts_Catalogue

Page 1135 | 3.2 Mounting, Positioning, Leveling with Screws, Clamping and Supporting Elements 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 350.1 Leveling Sets Steel / Stainless Steel Short Version 1 2 d 1 d 2 d 3 h 1 h 2 h 3 for Static load F in kN Code no. Type A Type AK Type A Type AK Adjustable range screw Steel Stainless steel C-Spanner F 1 F 2 F 1 F 2 25 6,6 M 15 x 1  15 20 19 24 4 M  6 40 30,7 27,1 20,2 DIN 1810-A25-28 32 6,6 M 20 x 1  18 24 23 29 5 M  6 65 55,7 43,4 36,5 DIN 1810-A30-32 32 9  M 20 x 1  18 24 23 29 5 M  8 65 48   43,4 30,8 DIN 1810-A30-32 32 11  M 20 x 1  18 24 23 29 5 M 10 65 37,9 43,4 23,4 DIN 1810-A30-32 45 11  M 30 x 1,5 22 29 29 36 7 M 10 120 92,9 84   64   DIN 1810-A45-50 45 13,5 M 30 x 1,5 22 29 29 36 7 M 12 120 80,4 84   54,8 DIN 1810-A45-50 45 17,5 M 30 x 1,5 22 29 29 36 7 M 16 120 45,5 84   28,9 DIN 1810-A45-50 58 17,5 M 40 x 1,5 28 37 37 46 9 M 16 210 136  148   92,9 DIN 1810-A58-62 58 22  M 40 x 1,5 28 37 37 46 9 M 20 210 90  148   59   DIN 1810-A58-62 58 26  M 40 x 1,5 28 37 37 46 9 M 24 210 37  148   20,3 DIN 1810-A58-62 70 22  M 50 x 1,5 33 44 43 54 10 M 20 330 210  225  136   DIN 1810-A68-75 70 26  M 50 x 1,5 33 44 43 54 10 M 24 330 157  225   97,3 DIN 1810-A68-75 70 33  M 50 x 1,5 33 44 43 54 10 M 30 330 53  225   20,6 DIN 1810-A68-75 80 26  M 60 x 2  38 49 50 61 12 M 24 495 322  323  195,3 DIN 1810-A80-90 80 33  M 60 x 2  38 49 50 61 12 M 30 495 218  323  118,6 DIN 1810-A80-90 80 39  M 60 x 2  38 49 50 61 12 M 36 495 101  323   38,2 DIN 1810-A80-90 Leveling sets GN 350.1 are used for leveling, adjusting and linking operations if small dimensions are given. They comprise a threaded upper sleeve and an internal threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height. see also... • Spherical Leveling Washers GN 350.3 → Page 1097 • Leveling Sets GN 350.5 (with Spherical Washer) → Page 1137 Information • Steel, 1.7225 (42 CrMo 4 V) ST Zinc plated, blue passivated • Stainless steel AISI 303 NI (X 10 CrNiS 18-9) • F 1 : max. total load • F 2 : max. total load after deduction of the max. preload - - for screws 8.8, µ = 0,125 (Steel) - - for screws 6.8, µ = 0,14 (Stainless steel) • Stainless Steel Characteristics → Page 2166 • RoHS Specification 4 • C-Spanner DIN 1810 (code no. see table) Accessory 1 d 1 2 d 2 3 Type 4 Material How to order 1 2 3 4 GN350.1-25-6,6-AK-ST 3 Type A Without lock nut AK With lock nut