Standard_Parts_Catalogue

Page 1241 | 3.3 Hinging, Latching, Locking of Doors and Covers GN 119 Latches continued By turning the latch clockwise the stepped cam latch moves up behind the door frame and pulls the door in. The large pulling-in range of the cam (10 mm) allows these locks to be used successfully on doors with sealing strips. When selecting clamping range ‚A‘ the thickness of the door seal might have to be taken into consideration. To fit the lock, the door will have to be provided with a hole as per sketch shown at a distance from the door frame to hole center of 23 mm. The lock housing with the preassembled operating bolt is fitted into the hole from the front and held in position with the hexagon nut. The distance piece and the cam latch are then fitted at the rear and fixed with the hexagon nut. The required installation bore in the door leaf, is usually genera- ted by punching or laser machining in series production. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. For small series and steel sheets below 2 mm thickness, the sheet metal punch GN 123 are the tool of choice → Page 1267. Construction and assembly instructions Latches GN 119 Stainless Steel Latches GN 119 → Page 1242