Standard_Parts_Catalogue

Page 1437 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 1 d 1 2 d 2 3 l 1 4 Type How to order (Threaded stud steel) 1 2 3 4 GN344-80-M16-138-BG 1 d 1 2 d 2 3 l 1 4 Type How to order (Threaded stud stainless steel) 1 2 3 4 GN344.5-100-M20-158-A Leveling feet GN 344 / GN 344.5 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area. The values given in the table regarding the static load capacity serve as a guide line only and if these are exceeded serious permanent deformation or breakage of the plastic socket could occur. The values were arrived at by a series of tests whereby a limited number of leveling feet were subjected for a limited time to a vertical static load to the feet. The details relating to the static load are non-binding recommen- ded values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Leveling feet GN 344 / GN 344.5 are supplied assembled, but are removable. Information • Foot Plastic Technopolymer (Polyamide PA) - - Glass fiber reinforced - - Black, matte finish - - Temperature resistant up to 100 °C • Rubber pad (NBR) 70 Shore A, black • GN 344 - - Threaded stud steel Property class 5.8 Zinc plated, blue passivated - - Hexagon nut ISO 4032 Steel zinc plated, blue passivated • GN 344.5 - - Threaded stud Stainless steel AISI 303 - - Hexagon nut ISO 4032 Stainless steel AISI 304 • Strength Values → Page 2152 • Elastomer Characteristics → Page 2158 • Plastic Characteristics → Page 2158 • Stainless Steel Characteristics → Page 2166 • RoHS Specification GN 344 / GN 344.5 Leveling Feet continued