Standard_Parts_Catalogue

Page 1500 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements GN 348 Insert Bushings for Square Tubes 1 s 1 2 s 2 3 d How to order 1 2 3 GN348-30-27-M12 1 2 3 s 1 s 2 d l 1 l 2 t Tube dimensions Static load Outside Inside Wall thickness in N (see information) 30 27 M  8 33  6 15 30 27 1,5 17000 30 27 M 10 33  6 15 30 27 1,5 17000 30 27 M 12 33  6 18 30 27 1,5 17000 30 27 M 16 33  6 20 30 27 1,5 17000 40 36 M  8 43  8 15 40 36 2   18000 40 36 M 10 43  8 15 40 36 2   18000 40 36 M 12 43  8 18 40 36 2   18000 40 36 M 16 43  8 20 40 36 2   18000 50 45 M 12 55 10 18 50 45 2,5 20000 50 45 M 16 55 10 20 50 45 2,5 20000 50 45 M 20 55 10 30 50 45 2,5 20000 50 46 M 12 55 10 18 50 45 2   20000 50 46 M 16 55 10 20 50 45 2   20000 50 46 M 20 55 10 30 50 45 2   20000 Insert bushings GN 348 offer the possibility of mounting screws in square tubes. The bushes are held in place via the tapered plug-in section in the tube. The values given in the table regarding the static load capacity serve as a guide only and if these are exceeded serious permanent deformation or breakage of the insert bushings could occur. The details relating to the load bearing capacity are non-binding recom- mended values and rule out any liability. They constitute no general war- ranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. see also... • Insert Bushings GN 448 (for Tubes) → Page 1498 / 1499 Information • Plastic (Polyamide PA) - - Glass fiber reinforced - - Black, matte finish - - Temperature resistant up to 120 °C • Bushing Brass, nickel-plated • Plastic Characteristics → Page 2158 • RoHS Specification Original design ND.Q