Standard_Parts_Catalogue

Page 1867 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 1414 Telescopic Slides with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 360 N Telescopic slides GN 1414 are installed vertically and in pairs. The stro- ke reaches ≈ 100 % of the nominal length l 1 (full extension). The rubber stops of type F dampen the impact of the slide in the end positions. This feature minimizes noise development and increases the lifespan. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements. The telescopic slides are delivered in pairs . They can be installed on the extension on either the left or right side due to the mechanics. All moun- ting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present. see also... • Technical Information on Telescopic Slides → Page 1898 ff. • Telescopic Slides GN 1424 (with Dampened Self-Retracting Mechanism) → Page 1878 • Telescopic Slides GN 1410 (with Full Extension) → Page 1861 Information • Slide profile Steel, zinc plated, blue passivated ZB • Bearings Roller bearing steel, hardened • Ball cage, outer slide Plastic • Ball cage, inner slide Steel, zinc plated • Rubber stop and detach function Plastic / Elastomer • Self-retracting mechanism, dampened Steel / Plastic • Operating temperature -20 °C to 100 °C • RoHS Specification 4 2 Type F With rubber stop, locking device in retracted position, detach function 1 l 1 2 Type 3 Identification no. 4 Finish How to order 1 2 3 4 GN 1414 -650-B-1-ZB • Other lengths and hole spacing • Other attachment options • Other surfaces On request 1 1 l 1 l 2 +3 −3 l 3 F S per pair in N l 1 l 2 +3 −3 l 3 F S per pair in N Stroke at 10,000 cycles at 100,000 cycles Stroke at 10,000 cycles at 100,000 cycles 300 250 550 260 140 500 500 1000 360 240 350 320 670 260 140 550 550 1100 310 190 400 375 775 310 190 600 600 1200 310 190 450 450 900 360 240 650 650 1300 260 140 3 Identification no. 1 Mounting with through-holes