Standard_Parts_Catalogue

Page 1881 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 1426 Telescopic Slides with Double-Sided Full Extension, Load Capacity up to 1380 N 2 Type B With rubber stop 3 Identification no. 2 Mounting with countersunk holes Telescopic slides GN 1426 are installed vertically and in pairs. The spe- cial design allows the stroke to achieve ≈ 100 % of the nominal length l 1 on both sides (double-sided full extension). Applications such as the double-sided loading of a drawer can be realized in this way. The rubber stops of type B dampen the impact of the slide in the front end positions. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements. The telescopic slides are delivered in pairs . They can be installed on the extension on either the left or right side due to the mechanics. All moun- ting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present. see also... • Technical Information on Telescopic Slides → Page 1898 ff. • Telescopic Slides GN 1420 (with Full Extension) → Page 1873 Information • Slide profile Steel, zinc plated, blue passivated ZB • Bearings Roller bearing steel, hardened • Ball cage Steel, zinc plated • Rubber stop Plastic / Elastomer • Operating temperature -20 °C to 100 °C • RoHS Specification 4 • Other lengths and hole spacing • Other attachment options • Other surfaces • With support bracket On request 1 l 1 l 2 +4 −4 l 3 F S per pair in N Stroke at 10,000 cycles at 100,000 cycles 500 503  988,5 1140 760 600 607 1192,5 1190 790 700 711 1396,5 1310 870 800 815 1600,5 1380 920 1 l 1 2 Type 3 Identification no. 4 Finish How to order 1 2 3 4 GN1426-800-B-2-ZB