Standard_Parts_Catalogue

Page 1889 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 1440 Telescopic Slides continued 1 l 1 a 6 a 7 a 8 a 9 a 10 a 11 a 12 a 13 a 14 a 15 a 16 a 17 a 18  300 - - - - - - - -  161 173 193 213 228  400 - - - - - - - -  261 273 293 313 328  500 - - - - - - - -  361 373 393 413 428  600 213 228 363 378 - - - -  461 473 493 513 528  700 213 228 363 378 - - - -  561 573 593 613 628  800 313 328 463 478 - - - -  661 673 693 713 728  900 313 328 463 478 - - - -  761 773 793 813 828 1000 413 428 563 578 - - - -  861 873 893 913 928 1200 313 328 463 478 713 728 863 878 1061 1073 1093 1113 1128 1500 413 428 563 578 913 928 1063 1078 1361 1373 1393 1413 1428 Mounting holes - outer slide Mounting holes - inner slide For the said loading forces F S to be absorbed reliably in the surrounding structure, all available through-holes of the outer and inner slide having a diameter (Ø) of 6.6 must be used. Alternatively, holes with a diameter (Ø) of 5.2 are available. The elongated holes, Ø 6.6 x 3.4, facilitate adjustment during mounting when needed. Failure to use mounting screws reduces the load capacity. The following screws can be used for mounting: Mounting screws Designation - standard Outer slide Inner slide Hexagon socket button head screw ISO 7380 M 5 / M 6 M 5 / M 6 Hexagon socket low cylindrical head screw DIN 7984 / DIN 6912 M 5 M 5 1 I 1 i 5 i 6 i 7 i 8 i 9 i 10 i 11 i 12 i 13 i 14 i 15 i 16 i 17  300 - - - - - - - - -  173 ** -  213 228  400 - 161 - - - - - -  261 273 293 313 328  500 - 229 - - - - - -  361 373 393 413 428  600 213 228 398 413 - - - -  461 473 493 513 528  700 313 328 463 478 - - - -  561 573 593 613 628  800 313 328 498 513 - - - -  661 673 693 713 728  900 413 428 563 578 - - - -  761 773 793 813 828 1000 413 428 598 613 - - - -  861 873 893 913 928 1200 313 328 463 478 713 728 863 878 1061 1073 1093 1113 1128 1500 413 428 563 578 913 928 1063 1078 1361 1373 1393 1413 1428 * Bores are only usable on type B and type K. ** Bores are only usable on type B and type M.