Standard_Parts_Catalogue

Page 1893 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 1450 Stainless Steel Telescopic Slides continued Rubber stop, locking device in retracted position The rubber stops of type F dampen the impact of the slide in the two end positions. This feature minimizes noise development and increases the service life. Attached to the slides in a partially concealed, partially visible manner,thestopsmeeteachoftherequirementsinregardsto shape, material, and hardness. In the retracted end position, the rubber stop additionally takes on a locking function, which is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by additional stop elements. Detach function Type F has additionally a detach function through which the extension slides can be completely separated from one another in the area of the middle and inner slide. This feature not only facilitates mounting. It also allows the extension to be quickly removed, for example, when fre- quent maintenance work is performed on the components located behind. The telescopic slide can be quickly and easily detached in the extracted position through activation of the release lever, allowing the inner slide to be removed from the front. For reattaching the slides, the ball cages need to be moved to the front end position. Then the inner slide is inserted to the back end stop where it locks into place automatically. The protected arrangement of the release mechanism pre- vents accidental detachment of the slide.