Standard_Parts_Catalogue

Page 1928 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers Linear Guide Rail Systems Technical Information, Load Rating Traversal speed Depending on application and installation length, the maximum traversal speed of cam roller linear guide rail systems is 7 m/s. Lubrication Once the cam roller carriage has been placed in the rail, it is recommended to slightly grease the raceway surfaces of the rail with a heavy duty lubricant for linear guide rail systems, such as Klüberplex BE 31-222, using a brush. Check the lubricant film at regular intervals for any dirt or pollution, e.g. with metal chips. In the event of visible pollution or clear discoloration of the lubricant, use a clean rag to clean the rails and the rollers and apply new lubricant. Applying new lubricant is normally necessary once a year or after 100 km of running distance. Article no. Load ratings in main load direction Permissible load torques C o rad in N C o ax in N M x in Nm M y in Nm M z in Nm GN 2424 -18-... 825 260 1,6 8,3 4,8 -28-... 2210 650 6,4 28 16,4 -35-... 3550 1070 13,2 63 34,1 -43-... 5520 1580 23,7 104,7 60,1 GN 2426 -18-... 410 - - - - -28-... 1100 - - - - -35-... 1760 - - - - -43-... 2700 - - - - Operational temperatures The components of the roller guide systems are suitable for use in a temperature range of -30 °C to 130 °C. Load rating The installation space, the desired mode of attachment and the load to be carried are the determining factors when se- lecting the best possible roller guide system. The values given below will help in selecting the most suitable cam roller carriage or the most suitable cam rollers. The details on load capacity are non-binding guide values given without liability and does not constitute any type of gua- rantee or warranty of intended use. The user must determine in each individual case whether a product is suitable for the intended application. Environmental factors and aging may affect the stated values.