Standard_Parts_Catalogue

Page 2053 | 3.9 Holding with Magnets 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 1 2 b 1 a b 2 h 1 h 2 Length  l A/F Nominal magnetic forces in N  6 30  9,5 3   10,2 41 1,5 18  8 30 11,6 2,3  9,3 41 2   30  8 40 12,5 4,8 12,9 41 2   30 10 45 13,7 6   13,2 41 2   30 With GN 56 retaining magnets doors, covers or even tools and accesso- ries can simply be attached to profile systems using magnets. Thanks to the side-mounted plastic spring elements the retaining magnet can be introduced into a profile nut at any point. When affixed this way, the magnet holds with a multiple of its magnet nominal holding force in the nut. If necessary, the retaining magnet can be taken out of the nut again with a suitable screw driver via the recesses on the front. Lightly turning the threaded pin against the groove base stops the retai- ning magnet from moving in the direction of the nut. Additional protec- tion against sideward movement can be achieved with nuts for T-nuts GN 506, for example. see also... • Product Family Standard Parts for Profile Systems → Page 18 • More Information to Retaining Magnets → Page 2028 Information GN 56 Retaining Magnets for Profile Systems 1 b 1 2 a 3 Color How to order 1 2 3 GN56-6-30-SW • Plastic Technopolymer (Polyamide PA) Black, matte finish SW • Material of the magnet NdFeB Neodymium, iron, boron Temperature resistant up to 80 °C • Steel insert, grub screw Zinc plated, blue passivated • RoHS Specification 3