Standard_Parts_Catalogue

Page 739 | 2.4 Tensioning with Clamping Mechanisms 1 Size 2 Type How to order (Steel) 1 2 GN820.2-130-MF GN 820.2 Toggle Clamps continued Toggle clamps GN 820.2 work according to the toggle principle: lever and clamping bar move in the opposite direction. They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position. The 90° rotated mounting surface allows a space-saving installation in addition to the clamping point. Toggle clamps with forked clamping arm, with two flanged washers (type MF) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type MFC. see also... • General Information for Toggle Clamps → Page 698 Information • Clamping Screws → Page 810 ff. • Holders for Clamping Screws GN 801 (for Type MF) → Page 815 • Clamping Arm Extenders GN 801.1 (for Type MF) → Page 816 • Clamping Arm Extenders GN 801.2 (for Type MF) → Page 817 Accessory • Steel — - - Case-hardened Steel C10 Zinc plated, blue passivated - - Bearing pins tempered - - Bearing rivets (for size 355 and up) case-hardened • Stainless steel AISI 304 NI • All moving parts Lubricated with special grease • Solid designed plastic handle Red, oil resistant • Clamping screw GN 708.1, type A - - Steel, zinc plated, blue passivated / Stainless steel AISI 304 - - Rubber thrust pad 85 Shore A • Stainless Steel Characteristics → Page 2166 • RoHS Specification 3 1 Size 2 Type 3 Material How to order (Stainless steel) 1 2 3 GN 820.2 -230-MF-NI