Standard_Parts_Catalogue

Page 760 | 2.4 Tensioning with Clamping Mechanisms GN 851.1 Latch Type Toggle Clamps Steel / Stainless Steel 2 Type T3 With square U-bolt, with catch T Without square U-bolt, with catch Size l 1 ≈ l 2 min. m 1 m 2 m 3 m 4 m 5 r ≈ at w 2 = 0 s w 1 Stroke w 2 ≈ Adjustable range 160  68 4,5 22    6,5 13  6,7 14,3 52 2   32 10 320 106 6   25,5 8,5 19 10,5 20,5 78 3   53   21 700 147 8   36,5 10   32 13,5 27   102 3,5 64   25 1 Size F H in N Holding capacity a 1 a 2 b 1 b 2 b 3 b 4 b 5 d 1 d 2 h 1 h 2 160 1600 5 25 26 35 21 25,5 14 M 4 4,3 37 10 320 3200 8 37 36 44 32 37   22 M 6 6,5 54 15 700 7000 13 45 52 54 38 48,5 26 M 8 8,5 67 23 The stroke of the square U-bolts of latch type toggle clamps GN 851.1 can be adjusted within its range. In the clamped position the square U-bolt is perpendicular to the clam- ping arm and the fixing plane of the latch type toggle clamp. In addition to the standard lengths of square U-bolts shown in the table, a variety of other lengths are also available under the GN 951.1 series. see also... • General Information for Toggle Clamps → Page 698 • Square U-Bolts GN 951.1 → Page 774 Information • Steel — - - Case-hardened steel C10 Zinc plated, blue passivated - - Square U-bolt Steel St 37 Zinc plated, blue passivated • Stainless steel NI - - Parts in sheet metal / Square U-bolt AISI 304 - - Pin AISI 303 • All moving parts Lubricated with special grease • Handle with plastic cap Red, oil resistant • Stainless Steel Characteristics → Page 2166 • RoHS Specification 3 1 Size 2 Type How to order (Steel) 1 2 GN 851.1- 700 -T3 1 Size 2 Type 3 Material How to order (Stainless steel) 1 2 3 GN851.1-160-T3-NI