Standard Machine Elements > Eccentrical Cams, Clamping Bolts, Clamping Units > Cam Point Levers
< Previous Product Next Product >
GN918.7 Clamping Bolt, Downward Clamping
Type KV - with ball lever, angular (serrations).
Type GV - with ball lever, straight (serrations).
Type SK - with hexagon.
Clamping direction L - anti-clockwise rotation.
Clamping direction R - clockwise rotation (drawn version).
Technical Instructions GN918.7pdf.pdf
Catalogue Technical Specification
2D/3D Cad Files
2D/3D Cad Files
GN918.7 Clamping Bolt, Stainless Steel, Downward Clamping.
These clamping bolts GN918.7 have a circumferential wedge surface. They allow rapid and safe clamping and releasing with a relatively large adjustable range and with high clamping force. The small pitch or wedge angle makes it self arresting.
The ball lever is linked with the clamping bolt via a serrated ratchet thus allowing an individual adjustment of the hand lever to the most suitable clamping position.
Screw bolt and washer are matched to allow an effortless release from the clamped position. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
Clamping bolts offer the advantage that they can be rotated away from the clamping area after release.
Clamping bolts can also be used as stepless adjustable end stops. If the washer is removed the bolt can be clamped direct to its support.
Ball point screws GN605 are recommended for use with these clamping bolts
Eccentrical Cam - Stainless Steel NI, AISI 303, chemically nickel plated.
Screw bolt and washer - Stainless Steel NI, AISI 630 , tempered.
Ball lever handle (type KV) - Stainless Steel NI, AISI 303, matt shot blasted.
Ball knob DIN319 Plastic, Duroplast, black, shiny finish.