Options for Pneumatic Press

Choose your Part

Please select desired options to reveal part number, price and availability

Please order from the main pneumatic press page, as details such as sizing are required. Thank you.

Product Description

EMG Pneumatic Press - Options Available

This page is an information page containing options for the EMG pneumatic press. Please order from the main pneumatic press page, as details such as sizing are required. Thank you.

Options Available

• 5 digit counter with reset switch
• Additional regulator to allow working with pressure from 0.5 to 6 bar.
• Base support 450mm section to let legs through.
• Blocking of the press at dead bottom centre (control with the bimanual to go up)
• Bottom dead centre fine adjustment (up to 2T).
• Descent speed regulation with excess flow valve.
• ER25 collet holder, with collet chuck (2 to 16mm) and key for tightening.
• Full set of filters and exhaust pipe to decrease noise level pollution to 75 dB
• Maintenance kit (kit of gaskets + guiding rings + 21 pneumatic oil (6 PHR)
• Maintenance kit (kit of gaskets + guiding rings + 21 pneumatic oil (6 LP)
• Parts quality system with force and displacement transducer
• Pause at bottom dead centre, to make sure the bottom dead centre is reached
• Power regulator with digital pressure gauge: cycle repetition and 1% precision
• Power regulator with needle pressure gauge: cycle repetition and 3% precision
• Set of 2 anvil stakes for T groove
• Set of two lateral panels, dimensions 350x250 (only with base support)
• Set of 4 anti-vibration supports