GN 1804.2 Slotted Locknut with Thread Locking
GN1804.2 slotted locknuts with thread locking can be secured against movement by twisting off the threaded shaft via a d4 set screw. The thread flanks of the nut ensure damage free securing and can be used as often as needed.
The d3 offset plane surface is intended as an axial contact surface.
Nut - Steel ST. Tensile strength class 5.8 (500 N/mm2), blackened.
Set screw - Steel, blackened.
C-Spanner DIN1810. Ordering code number as below table.