GN804 Clamping Bolt with Adjustable Spring Loaded Thrust Pad
In order to pass the dead centre point and/or compensate for work piece tolerances when using hand-operated toggle clamps, an elastic clamping pad such as GN708.1 can be used.
Clamping bolts GN 804 fitted with Belleville spring washers do not only help to overcome workpiece tolerances but they also allow presetting of the required clamping force.
This adjustment can be made with the hexagon nut (A/F). The setting nut stroke is the distance by which the Belleville washers can be preloaded as shown on the above graph to give the required clamping force.
Furthermore the pressure pad is movable.
Bolt - Steel ST, Tensile strength class 5.8, zinc plated, blue passivated
Hexagon nuts - ISO4032, Steel ST zinc plated, blue passivated
Thrust pad - Steel ST, nitrided, blackened