GN876 Swing Clamps, Pneumatic, with Screw-In Threads

Choose your Part

Please select desired options to reveal part number, price and availability

Type

Type A - Clamping arm with slotted hole and 2 flanged washers

Type AC - Clamping arm with slotted hole, 2 flanged washers and GN708.1 spindle assembly

Type B - Clamping arm with threaded hole

Type F - Adapter flange

Type N - Without clamping arm

Coding

Coding L - Swiveling Left

Coding R - Swiveling Right

Product Description

GN876 Swing Clamps, Pneumatic, with Screw-In Threads

Swing clamps GN 876 are used when the clamping point for inserting and removing the workpiece must be freely accessible on top.

The design allows especially space-saving mounting. The height of the swing clamp can be adjusted via the screw-in thread.

During the clamping action, the arm is first swiveled by 90° and lowered, followed by the linear tensioning motion. The workpiece clamping must take place within the clamping stroke.

The angle orientation of the clamping arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting.

Specification

Aluminum - hard anodized, wear-resistant surface

Double-action air cylinder - max. pressure 6 bar

Socket cap screw DIN912 - Steel, zinc plated, blue passivated

Washer ISO7092 - Steel, zinc plated, blue passivated

Spindle assembly GN 708.1, type A - Steel, zinc plated, Rubber tip 85 Shore A

Accessory

Clamping arms GN875.2

Clamping arms GN875.3

Adapter flanges GN875.4

Threaded flanges GN876.1

Toggle clamp spindle assemblies GN708.1

Slotted locknuts DIN70852