GN552.6 ATEX Breather Cap, Plastic

Choose your Part

Please select desired options to reveal part number, price and availability

Options

Coding 1 - with splash shields, no filter.

Coding 2 - with splash shields, with PU filter.

Type A - without dipstick.

Type B - with dipstick - not available from stock, requires a minimum order quantity

Product Description

GN552.6 ATEX Breather Cap, Plastic

These breather caps are suitable for use in an explosion risk environment. They comply with guidelines 94/9/EG. Detailed operating instructions are included.

They are cost effective and can be supplied with or without an attached dipstick. They are fitted with a splash guard device which prevents oil loss, especially for when oil is violently agitated and could be splashed against the breather cap.

They are resistant to heat, solvents, oils, grease and other chemical agents. Max. and Min. markings can easily be added to the flats of the dipstick.

Specification

• Upper part (Cap) Plastic PA, temperature resistant up to 80°C, yellow, RAL 1021, matte finish, GB
• Lower part (threaded part), Plastic PA - temperature resistant up to 80°C, black, matte finish
• Sealing ring - Rubber, NBR (Perbunan)
• Air filter - PU foam, Polyurethane, Filtration 40 m.
• Dipstick - Steel, phosphated.

Accessories 

Weldong Sockets GN7490

On Request

Fluid level markings / special lengths see GN109