GN552 (SFP) Breather Cap, Plastic, Optional Dipstick

Choose your Part

Please select desired options to reveal part number, price and availability

Options

Type A - without dipstick.

Type B - with dipstick.

Identification Number 0 - with splash shields, with wire mesh filter.

Identification Number 1 - with splash shields, no filter

Identification Number 2 - with splash shields, with PU filter.

Identification Number 3 - no splash guards, no filter

Idenitification Number 4 - no splash guards, with PU filter

Product Description

GN552 (SFP) Breather Cap

These plastic breather caps are cost effective and can be supplied with or without an attached dipstick. They are fitted with a splash guard device which prevents oil loss, especially for when oil is violently agitated and could be splashed against the breather cap.

They are resistant to heat, solvents, oils, grease and other chemical agents. Maximun and minimum markings can be added easily to the flats of the dipstick.

Specification

• Plastic, temperature resistant up to 100C.
• Cap - Orange, RAL 2004
• Lower (threaded) part - Black.
• Sealing ring - Rubber NBR (Perbunan)
• Air filter wire mesh - Zinc plated, filtration 50μm to 60μm
• Air filter - PU-foam (Polyurethane), filtration 40μm , temperature resistant up to 100C
• Dipstick - Steel, phosphated.

On Request 

Fluid level markings / special lengths - see GN109