Please note we are closed for the bank holiday all enquiries and orders will be processed on Tuesday 6th May. We are aware there is still some technical issues re. speed and table loading. To view table data, please click 'Technical Data' on any page, followed by 'Catalogue Technical Specification'. If you need assistance please contact us using either the online chat or email or phone +44(0)1732763377. We apologise for any inconvenience.

GN808.2 Universal Joint Shaft, Steel, Friction Bearing

Choose your Part

Please select desired options to reveal part number, price and availability

Product Description

GN808.2 Universal Joint Shaft, Steel, Friction Bearing

Universal joint shafts with friction bearing GN 808.2 do not only bridge the misaligenment of two shafts, but at the same time they offer a length compensation. The power transmission is achieved by two universal joints DIN808 (type EG) a splined shaft and a sliding sleeve.

It is important to check the accuracy when connecting the splined shaft to the sliding sleeve. The markings => <= have to be opposite to each other.

Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.

Besides the different types listed in the table below for l1-l2, and for design-engineering reasons limited lenght l1, almost each desired length can be provided.

Specification

Steel ST, blank.

Joint bearing areas / pins /bearing sleeves, case hardened.

Universal joint shafts with d1=16 have instead of the spline shaft a hexagon shaft.

* The universal joint shafts specified in this table are available in stock (bore d2 with keyway K). Otherwise universal joints shafts for each application are specially designed.

On Request

-Different lengths l1 and l2

-Bores without keyway

-Bores with square

-With other or unequal bores