GN1130 Lifting Pin, Self Locking, Stainless Steel
These lifting pins, GN 1130, are carrier elements designed for fast, easy and above all, safe use. They resolve many application issues by being space saving, inter-changeable, cost effective, and having additional safety features.
Safety features include the locking in facility with push button removal. Pressing the red aluminium button will release the locking effect of the locking ball, allowing the load bolt to be moved in or out of the holding bore hole. The shackle rotates by at least 180°, with a safety flange fitted as a safeguard against inadvertent operation. Depending on the direction of pull, the ball load bolt may move freely by 360° in the holding bore hole.
It is no longer necessary to have sling and lifting gear permanently remaining at the workpiece (e.g. load rings). Holding bore holes with d1 H11 are sufficient in use. Once the holding bush is fixed into the desired application, the lifting pin is inserted for completion. The lifting pin can then be removed and attached to another application without the need to purchase additional lifting bolts. If the pin is removed, then unauthorized lifting cannot take place without the lifting pins being issued. Another advantage is once the pins are removed then no protruding eye bolts are left on show making the project or desired application look much more professional in appearance.
For more user guidelines, see the operating instructions enclosed with every lifting pin.
Stud - Stainless Steel NI AISI 630, age-hardened, NI.
Shackle - Stainless Steel AISI 316Ti
Push button - Aluminium, red anodized.
Spring - Stainless Steel.
Holding bush GN1132