Standard Machine Elements > Screws, Nuts, Washers Clamping & Supporting Elements > Swing Bolts / Shoulder Screws / Thrust Bolts
< Previous Product Next Product >

GN606 Ball Point Screw Hex Drive, Stainless Steel

images/300/GN606_Ball_point_screws_Stainless_Steel_sketch_H.png

Type AN - full ball

Type BN - flat ball

Type VN - flat ball, with swivel limiting stop (M6-M16)

Type VRN - flat ball, with swivel limiting stop, corrugated (M6-M16)

Select Values to Buy:

Tech Spec:

GN606 Ball Point Screw Hex Drive, Stainless Steel

Ball point screws GN606 with full ball (Type AN) are used in applications where a ball point contact is required.

The flat faced moving ball (Type BN) allows a clamping or supporting of non parallel surfaces.<p/.

The ball of type VN/VRN can be swivelled to a maximum of 9 to ensure that clamping is always maintained on the flat section of the ball.

Specification

Stainless Steel AISI 304 / AISI 440C

Ball hardened

RoHS compliant

Select / Deselect Visible Columns

Hide	d1	Show
Hide	l1	Show
Hide	Type	Show
Hide	d2	Show
Hide	d3	Show
Hide	d4	Show
Hide	l2	Show
Hide	l3	Show
Hide	l4	Show
Hide	l5	Show
Hide	A/F	Show
Hide	Static load in N Type AN/BN	Show
Hide	Material	Show

PartCode	d1	l1	Type	d2	d3	d4	l2	l3	l4	l5	A/F	Static load in N Type AN/BN	Material	Mass

GN606-M4-10-AN	M4	10	AN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-10-BN	M4	10	BN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-12-AN	M4	12	AN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-12-BN	M4	12	BN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-16-AN	M4	16	AN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-16-BN	M4	16	BN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-20-AN	M4	20	AN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-20-BN	M4	20	BN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.002
GN606-M4-25-AN	M4	25	AN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.003
GN606-M4-25-BN	M4	25	BN	2.5	1.8	7	0.8	0.4	2.1	4	3	2040	NI	0.003
GN606-M5-12-AN	M5	12	AN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.003
GN606-M5-12-BN	M5	12	BN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.003
GN606-M5-16-AN	M5	16	AN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.003
GN606-M5-16-BN	M5	16	BN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.003
GN606-M5-20-AN	M5	20	AN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.004
GN606-M5-20-BN	M5	20	BN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.004
GN606-M5-25-AN	M5	25	AN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.004
GN606-M5-25-BN	M5	25	BN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.004
GN606-M5-30-AN	M5	30	AN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.005
GN606-M5-30-BN	M5	30	BN	3	2	8.5	0.9	0.5	2.4	5	4	3000	NI	0.005
GN606-M6-16-AN	M6	16	AN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.006
GN606-M6-16-BN	M6	16	BN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.006
GN606-M6-16-VN	M6	16	VN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.006
GN606-M6-16-VRN	M6	16	VRN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.006
GN606-M6-20-AN	M6	20	AN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.007
GN606-M6-20-BN	M6	20	BN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.007
GN606-M6-20-VN	M6	20	VN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.007
GN606-M6-20-VRN	M6	20	VRN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.007
GN606-M6-25-AN	M6	25	AN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.008
GN606-M6-25-BN	M6	25	BN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.008
GN606-M6-25-VN	M6	25	VN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.008
GN606-M6-25-VRN	M6	25	VRN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.008
GN606-M6-30-AN	M6	30	AN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.009
GN606-M6-30-BN	M6	30	BN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.009
GN606-M6-30-VN	M6	30	VN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.009
GN606-M6-30-VRN	M6	30	VRN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.009
GN606-M6-40-AN	M6	40	AN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.011
GN606-M6-40-BN	M6	40	BN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.011
GN606-M6-40-VN	M6	40	VN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.011
GN606-M6-40-VRN	M6	40	VRN	4	3.2	10	1.4	0.6	3	6	5	4500	NI	0.011
GN606-M8-20-AN	M8	20	AN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.014
GN606-M8-20-BN	M8	20	BN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.01
GN606-M8-20-VN	M8	20	VN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.013
GN606-M8-20-VRN	M8	20	VRN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.013
GN606-M8-30-AN	M8	30	AN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.02
GN606-M8-30-BN	M8	30	BN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.015
GN606-M8-30-VN	M8	30	VN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.02
GN606-M8-30-VRN	M8	30	VRN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0
GN606-M8-35-AN	M8	35	AN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.019
GN606-M8-35-BN	M8	35	BN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.017
GN606-M8-35-VN	M8	35	VN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.017
GN606-M8-35-VRN	M8	35	VRN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.017
GN606-M8-40-AN	M8	40	AN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.019
GN606-M8-40-BN	M8	40	BN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.018
GN606-M8-40-VN	M8	40	VN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.019
GN606-M8-40-VRN	M8	40	VRN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.2
GN606-M8-50-AN	M8	50	AN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.025
GN606-M8-50-BN	M8	50	BN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.023
GN606-M8-50-VN	M8	50	VN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.023
GN606-M8-50-VRN	M8	50	VRN	5.5	4.2	13	1.7	0.7	3.5	8	6	9000	NI	0.023
GN606-M10-25-AN	M10	25	AN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.026
GN606-M10-25-BN	M10	25	BN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.025
GN606-M10-25-VN	M10	25	VN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.025
GN606-M10-25-VRN	M10	25	VRN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.025
GN606-M10-30-AN	M10	30	AN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.027
GN606-M10-30-BN	M10	30	BN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.02
GN606-M10-30-VN	M10	30	VN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.027
GN606-M10-30-VRN	M10	30	VRN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.299
GN606-M10-40-AN	M10	40	AN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.034
GN606-M10-40-BN	M10	40	BN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.031
GN606-M10-40-VN	M10	40	VN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.031
GN606-M10-40-VRN	M10	40	VRN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.031
GN606-M10-50-AN	M10	50	AN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.04
GN606-M10-50-BN	M10	50	BN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.037
GN606-M10-50-VN	M10	50	VN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.037
GN606-M10-50-VRN	M10	50	VRN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.04
GN606-M10-60-AN	M10	60	AN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.047
GN606-M10-60-BN	M10	60	BN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.044
GN606-M10-60-VN	M10	60	VN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.044
GN606-M10-60-VRN	M10	60	VRN	7	5.7	16	2.3	0.8	4.5	10	8	14400	NI	0.044
GN606-M12-30-AN	M12	30	AN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.04
GN606-M12-30-BN	M12	30	BN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.038
GN606-M12-30-VN	M12	30	VN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.038
GN606-M12-30-VRN	M12	30	VRN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.038
GN606-M12-50-AN	M12	50	AN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.056
GN606-M12-50-BN	M12	50	BN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.054
GN606-M12-50-VN	M12	50	VN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.054
GN606-M12-50-VRN	M12	50	VRN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.054
GN606-M12-80-AN	M12	80	AN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.083
GN606-M12-80-BN	M12	80	BN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.08
GN606-M12-80-VN	M12	80	VN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.08
GN606-M12-80-VRN	M12	80	VRN	8	7.1	18	2.8	0.9	5	12	10	18000	NI	0.08
GN606-M16-40-AN	M16	40	AN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.091
GN606-M16-40-BN	M16	40	BN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.092
GN606-M16-40-VN	M16	40	VN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.092
GN606-M16-40-VRN	M16	40	VRN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.092
GN606-M16-60-AN	M16	60	AN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.122
GN606-M16-60-BN	M16	60	BN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.123
GN606-M16-60-VN	M16	60	VN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.123
GN606-M16-60-VRN	M16	60	VRN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.123
GN606-M16-80-AN	M16	80	AN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.154
GN606-M16-80-BN	M16	80	BN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.151
GN606-M16-80-VN	M16	80	VN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.153
GN606-M16-80-VRN	M16	80	VRN	12	9.7	24	4	1.5	6	16	14	43800	NI	0.151

#26078.29~26081.85#

BERGER TOOLS LTD

GN606 Ball Point Screw Hex Drive, Stainless Steel

Select Values to Buy:

Tech Spec: