EPV solid clamping arm
GN863 Pneumatically Operated Heavy Duty Clamps, Magnetic Piston
These pneumatically operated, heavy duty clamps, GN 863, have been constructed in such a way as to make them easily demountable. The bearing pins are axially fixed with circlips. This allows the clamping arm to be modified once it is dismantled, to suit any particular application.
To ensure an extended life of the mechanical parts as well as the air cylinder the operating pressure should not exceed 6 bar. In addition a lubrication control unit should be fitted in the air in-feed line.
In conjunction with a proximity switch GN896.3 the piston position is sensed and the generated signal can be used in sequence control systems.
Base - cast steel, black lacquered
Other parts - Steel St 60, zinc plated, blue passivated
Bearing pins - case-hardened
Double action air cylinder - max. pressure 6 bar
All moving parts lubricated with special grease.
Solid moulded plastic handle sleeve - red, oil resistant.
Also available without magnetic piston.
Proximity switch GN896.3