Type M - Straight lever with threaded bore
Type N - Angled lever with threaded bore
GN99.2 Adjustable Clamping Lever, Push Disengage, Threaded Stud
These adjustable clamping levers GN 99.2 have small dimensions, for use in applications where either the clamping range is limited or where a specific lever position is required. The serrated bore in the spherical hub is fitted with a threaded bolt insert which engages in the hub with its own serrations.
By depressing the clamping lever the serrations are disengaged freeing it for repositioning in the most convenient position. When releasing the lever the serrations will re-engage automatically.
Should a rotation of 360° not be possible the insert can be slightly screwed in (after the lever has been disengaged) by means of the slotted knurled screw.
Please note: M6 prices shown are for small quantities up to 25 pieces and with thread supplied not blackened. For larger quantities or with thread supplied blackened please call our friendly sales team on +44 (0)1372 763377
Steel ST, Tensile strength 500 N/mm2, fine turned, blackened.