Please select desired options to reveal part number, price and availability
Control Panel CP-01A - Suitable for hose systems equipped with Micro hose and Micro connections
Control Panel CP-02A / CP-08A / CP-11A - Control panel according to Ford and GM North America standards
Control Panel CP-03A - with aluminium base with shut off valve
Control Panel CP-06A / CP-09A - with aluminium base, pressure sensor and digital display
Control Panel CP-07A / CP-10A / CP-12A - Control panel with aluminium base for hose system managing
Control Panel CP-14A - Three 7/16-20UNF gas outlets for managing hose system
Control Panel CP-15A - with pressure gauge, charging valve and steel protection
Control Panel CP-16A - three 1/8" gas outlets for managing hose system
Control Panel CP-17A - possible to set a desired working range outside which the unit sends an alarm signal
Control Panel CP-20A / CP-21A - possible to constantly monitor the pressure valve of the system
Control Panel CP-23A - with pressure sensor EYE
Control Panel CP-AUMCP - ideal for operating hosed systems or single cylinders with different pressures in the same mould.
Control panel CP-MCPC / CP-19A - offers wide flexibility of use, increased further when combined with additional AUMCP units
Control Panel CP-VC - Standard control panel to charge, adjust and check the pressure in the connected system
Control Panel CP-VD - Control panel according to Fiat standards
Hose Panel Connections CP-RPTD / CP-RPTL / CP-RPTM / CP-RPTR / CP-RPTT - for CPVD control panel (Fiat standard)
Micro control panel with aluminium base, gauge, charging and discharging valve, safety plug and steel protection. Suitable for hose systems equipped with Micro hose and Micro connections. 16 M6 ports.
1. Discharging Valve
2. Pressure gauge 0-620 bar
3. Quick coupling for charging Cejn
4. Over pressure rupture plug
Mini Control panel offers wide flexibility of use, increased further when combined with additional AUMCP units, thanks to its unique miniaturized design. It consists of a aluminium block with pressure gauge, charging and discharging valve, 4 outlets and a On/Off valve and overpressure rupture plug.
1. Discharging Valve 4. Over Pressure Rupture Plug
2. Pressure Gauge 0-620 Bar 5. 1/8" G connecting ports (5x)
3. Quick Coupling for Charging Cejn 6. Shut off Valve
Additional units for mini control panel MCPC. Ideal for operating hosed systems or single cylinders with different pressures in the same mould. Each unit includes pressure gauge, on-off valve and one outlet. Designed for a maximum combination of 1 MCPC + 4 AUMCP.
1. Pressure Gauge 0-620 Bar 4. Cap Nut (2x)
2. Shut off Valve 5. 1/8" G connecting ports (5x)
3. Tie Rod (2x)
| Ordering | Code | Q.ty | L | |
|---|---|---|---|---|
| (1) MCPC + (1) AUMPC | 46TAUMCP01 | 2 | 65 | 2,56 |
| (1) MCPC + (2) AUMPC | 46TAUMCP02 | 2 | 115 | 4,53 |
| (1) MCPC + (3) AUMPC | 46TAUMCP03 | 2 | 165 | 6,5 |
| (1) MCPC + (4) AUMPC | 46TAUMCP04 | 2 | 215 | 8,46 |
Standard control panel to charge, adjust and check the pressure in the connected system. It consists of a plate with pressure gauge, charging and discharging valve, 3 outlets, steel case and can be equipped with a rupture disc. (optional)
1. Discharging valve 4.1. Over Pressure Rupture Plug
2. Pressure Gauge 0-620 bar 4.2. Over pressure safety plug CE
3. Quick Coupling for Charging Cejn 5. 1/8" G connecting ports (4x)
4. Closing Plug M20
Control panel according to Ford and GM North America standards. Made up of an aluminium base, gauge, charging and discharging valve, 9/16-18 UNF ORFS adapter and steel protection. 3 ports G1/8".
1. Discharging Valve 4. Over Pressure Rupture Plug
2. Pressure Gauge 0-620 Bar 5. O-ring Seal Adapter 9/16 - 18 UNF
3. Quick Coupling for Charging Cejn
Control panel with aluminium base, gauge with shut off valve, charging and discharging valve, over pressure rupture plug, steel protection. 9G1/4" ports for hose systems managing. With the shut-off valve closed, the gauge is protected from pulsating pressure during operation. For checking and adjusting the pressure the interception valve on the gauge must be opened.
1. Discharging Valve 4. Over pressure rupture plug
2. Pressure gauge 0-620 bar 5. Shut-off valve
3. Quick coupling for charging Cejn
Control panel with aluminium base, equipped with pressure sensor with digital display, charging and discharging valve, safety plug, steel protection and two 1/8" gas outlets for hose system managing. By connecting directly the pressure sensor with the press control unit, it is possible to set a desired working range, outside this value, the control unit will send an alarm signal.
1. Discharging Valve 4. Over Pressure Rupture Plug
2. Pressure Gauge 0-600 Bar 5. Eliectrical Connector
3. Quick Coupling for Charging Cejn
| Technical Data | |
|---|---|
| Electrical Connector Type | M12x1 - Male (4-pin) |
| Pressure Connection | G 1/4" DIN3852 |
| Nominal Pressure | 0 - 600 bar |
| Burst Pressure | 1100 bar |
| Operating voltage Uo | 18...36 V DC |
| Output Current max. | 500mA |
| No-load supply current lo max | < 50mA |
| Switching frquency f | 200 Hz |
| Temperature range | -25C... + 85C |
| Degree of protection as per IEC 60529 | IP 67 when connected |
| Output ; digital data (switching points only) 2xPNP, NO/NC selection | |
Always depressurise and disconnect pressure sensors from the power supply before establishing an electrical connection.
|
Electrical Connections |
Sensors with Switching Output |
Wire Connections Colour |
|---|---|---|
| Supply + | 1 | Brown |
| Supply - | 3 | Blue |
| Signal + | - | White |
| Switching output 1 | 4 | Black |
| Switching ouput 2 | 2 | - |
| Shield | Connector Housing | - |
Control panel with aluminium base, equipped with pressure sensor and digital display, charging and discharging valve, overpressure rupture plug, steel protective cover and two G1/8" ports for managing linked systems. By connecting the pressure sensor to the press control, it is possible to constantly monitor the pressure valve of the system and manage it accordingly.
1. Discharging Valve 4. Over Pressure Rupture Plug
2. Pressure Gauge 0-600 Bar 5. Eliectrical Connector
3. Quick Coupling for Charging Cejn
| Technical Data | |
|---|---|
| Electrical Connector Type | M12x1 - Male (4-pin) |
| Pressure Connection | G 1/4" DIN3852 |
| Nominal Pressure | 0 - 600 bar |
| Burst Pressure | 1000 bar |
| Operating voltage Uo | 18...36 V DC |
| Output Current max. | 500mA |
| No-load supply current lo max | < 50mA |
| Switching frquency f | 200 Hz |
| Temperature range | -25C... + 85C |
| Degree of protection as per IEC 60529 | IP 67 when connected |
| Output ; digital data (switching points only) 2xPNP, NO/NC selection | |
Always depressurise and disconnect pressure sensors from the power supply before establishing an electrical connection.
|
Electrical Connections |
Sensors with Switching Output |
IO Link Mode |
Wire Connections Colour |
|---|---|---|---|
| Supply + | 1 | 1 | Brown |
| Supply - | 3 | 3 | Blue |
| IO - Link | - | 4 | White |
| Switching output 1 | 4 | - | Black |
| 4...20mA | 2 | 2 | - |
| Shield | Connector Housing | Connector Housing | - |
Control panel with aluminium base, equipped with gauge, charging and discharging valve, safety plug, steel protection and three 1/4" and one 1/8" gas outlets for hose system managing.
1. Discharging Valve 4. Over Pressure Rupture Plug
2. Pressure Gauge 0-600 bar 5. Pressure Switch 50-300 bar
3. Quick Coupling for Charging Cejn
Control panel according to Daimler standard. Made of aluminium base, equipped with pressure gauge, charging and discharging valve, pressure switch and steel protection. . It can be equipped with over pressure rupture plug.
1. Discharging Valve 5. Closing plug M20
2. Pressure Gauge 0-620 Bar 5.1. Over Pressure Rupture Plug
3. Quick Coupling for Charging Cejn 5.2. Over Pressure Safety Plug CE
4. Pressure Switch 50-300 bar
(Fiat standard)
1. Discharging valve 4. Closing Plug M20
2. Pressure gauge 0-620 bar 4.1. Over Pressure Rupture Plug
3. Quick coupling for charging ISO 7241-1 Series B 4.2. Over Pressure Safety Plug CE
Control Panel CP-VD (FIAT Standard) - Hose Connections
Control panel with aluminium base, equipped with pressure gauge, charging valve and steel protection. Two 1/8" gas outlets for managing hose system.
1. Quick Coupling for Charging Cejn
2. Pressure gauge 0-620 bar
Control panel with aluminium base, equipped with pressure gauge, charging and discharging valve, over pressure rupture plug, steel protection, three 1/8" gas outlets for managing hose system.
1. Discharging Valve 3. Quick Coupling for Charging Cejn
2. Pressure Gauge 0-620 bar 4. Over Pressure Rupture Plug
Control panel with aluminium base, equipped with pressure sensor and digital display, Cejn-quick coupling for charging, over pressure rupture plug and three 1/8" ports. By connecting the control panel to the press control, it is possible to set a desired working range outside which the unit sends an alarm signal.
1. Pressure Gauge 0-600 bar 3. Over Pressure Rupture Plug
2. Quick Coupling for Charging Cejn 4. Electrical Connector
| Technical Data | |
|---|---|
| Electrical Connector Type | M12x1 - Male (5-pin) Reverse Key (B-Code) |
| Pressure Connection | S12,65x1,5 |
| Nominal Pressure | 0 - 350 bar |
| Temperature Range | -20C... + 60C |
| Degree of protection as per IEC 60529 | IP 65 when connected |
| Supply Voltage | 12....24 V DC / 100...120 V AC, 50...60Hz |
| Max Output Relay Current (2-4 Wire) | 2A / 1A |
| Max Current | 230mA |
Always depressurise and disconnect pressure sensors from the power supply before establishing an electrical connection.
|
Electrical Connections |
12....24 V DC |
100...120 V AC 50...60Hz |
Wire Connections Colour |
|---|---|---|---|
| 1 | + | 1 | Brown |
| 3 | - | 3 | Blue |
| 2 | Output relay - Normally Open | White | |
| 4 | Black | ||
| 5 | Ground | Green / Yellow | |
Control panel with aluminium base, equipped with pressure sensor EYE, charging and discharging valve, over pressure rupture plug, steel protective cover, Cejn-quick coupling for charging and three G1/8" ports for managing linked systems.
1. Discharging Valve 3. Quick Coupling for Charging Cejn
2. EYE Pressure Sensor 4. Over Pressure Rupture Plug
| Technical Data | |
|---|---|
| Measuring Range | 0-600 bar/8700 psi/60MPs |
| Visualisation | 3 digit display +2 led |
| Resolution | 1 bar/10psi/1 MPa |
| Measurement Unit | bar/psix20/MPa |
| Accuracy | +1.0% f.s, +1 digit whichever is greater |
| Working Temperature | 0-80°C / 176°F |
| Compatible Fluids | Nitrogen |
| Battery | Maxwell CR2032-3V, 220mAh |
| Material | Stainless Steel/ Aluminium Alloy |
| Connection | G1/8" |
| Alarms | Low Pressure (adjustable), High pressure (fixed), Sensor malfunction, Low battery |
| Battery Lifetime | > 2000 readings |
| Degree of Protection | IP65 when connected |
CAD Viewer
Technical Data