Type A - without serrations
Type B - with 30 serrations
GN215 Indexing Lever, With or Without Serrations
With these indexing levers shafts can be turned to a predetermined angle and positively locked. To index, lift the lever against the spring pressure from the serrations, allowing one handed control. Limiting the indexing angle can be achieved with two dowels.
The bush is connected to the shaft via a keyway. The location flange is bolted to the machine with two socket head cap screws (M 5). The lever, via the location pin, provides the connection between shaft and location flange.
The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.
Steel - blackened.
Cover - plastic, black, with inserted Alu-disc, matt anodized, natural colour.
Ball knob DIN319 - plastic, black.
Keyway for bore - K10: 3 P9 x 1.1 K12 - K16: