Type APV3S - Forked clamping arm
Type EPV3S - Solid clamping arm
GN862.1 Pneumatically Operated Clamp, Manually Operated
GN 862.1 pneumatic toggle clamps are built from the same construction as GN862.
A special feature of these pneumatically operated clamps is that they can be mounted in two different planes, and they can also be operated manually via the grip handle. For example, they can individually be manually closed, and then all clamps can be opened at once via the pneumatic function.
To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar.
They are also available as version M (magnetic piston). In conjunction with proximity switch GN896.2 the piston is sensed and the generated electrical signal can be used in sequence control systems. This clamp design is used, for instance, if one workpiece is to be manually clamped with several clamps and to be released pneumatically by means of a single electrical pulse.
Two stepped side washers / clamping bolt retainers are included.
Parts in sheet metal - Case-hardened Steel ST C10, zinc plated, blue passivated.
Bearing pins - Hardened
Bearing rivets - Case-hardened
Air cylinder bearing pins - Case-hardened
Double-action air cylinder - Max. pressure 6 bar
All moving parts lubricated with special grease.
Solid moulded plastic handle sleeve - Red, oil resistant
Spindle assembly GN708.1, Type A - Steel ST, zinc plated, Rubber tip 85 Shore A
Also available with magentic piston.
GN802 Clamp mounts for toggle clamps (for type APV3S)
GN809 Clamp mounts for toggle clamps (for type EPV3S)
GN896.2 Proximity switch