Identification 2 - with 2 clamping screw DIN 912, stainless steel
GN165.1 Linear Actuator Connector, Aluminium
Linear actuator connectors GN 165.1 are normally supplied in connection with a mounted square linear actuator and for function control.
The square of the linear actuator connector is supplied not machined in the standard design. Together with the tolerance of the tube, this may result in a relatively large play. This can be adjusted in one direction using the clamping screws. In the other direction (at 90° to it), a defined minimum play can only be achieved by appropriate machining (special design) of the square linear actuator connector.
The standard clamping bolts are socket cap screws DIN912. They can be replaced by adjustable clamping levers GN911
Aluminium, plastic coated, black SW RAL 9005, textured finish
Clamping square not machined
Socket cap screws DIN912 - Stainless Steel AISI 304
Hexagon nuts DIN985 - Stainless Steel AISI 304
Adjustable, clamping lever GN911
Square linear actuators GN291.1
Linear actuator connectors with reduced play.