Type OZ - Without centring step (smooth)
Type MZ - With centring step
Type AV - With male serration
Type IV - With female serration
Identification 2 - with one clamping screw DIN 912 stainless steel
GN274.1 Swivel Clamp Linear Actuator Connector, Aluminium
The Polyamide bush of the swivel clamp linear actuator connectors GN 274.1 is bonded into the sliding bore.
By means of the clamping screw on the sliding bore the movement can either be set or the slider can be clamped (after setting of final adjustment).
As a rule the sliders are only supplied assembled on a linear actuator.
The hexagon nuts DIN985 are either zinc plated or in stainless steel to suit the screws.
The clamping nuts (Identification no. 1 - 2) of the connector clamps comprise a screw and a nut and, in the case of the hexagon screw and clamp-ing levers, a spacer tube is added.
Special executions: different surface finish or colours.
Aluminium AL, Black plastic coated textured finish SW
Guide bore - Mechanically machined
Slide bush - Polyamide
Socket cap screws DIN912 - Steel ST, zinc plated / Stainless Steel NI, AISI 304
Hexagon nuts DIN 985, Steel ST, zinc plated / Stainless Steel NI, AISI 304
Adjustable clamping levers GN911 - Zinc die casting
Inserts / Distance bushings - Stainless Steel NI, AISI 303