< Previous Product Next Product >
GN131.1 Linear Actuator Connector, for Single Axis System
Identification No. 2 with 2 clamping screws DIN912 stainless steel
GN131.1 Linear Actuator Connector, Stainless Steel, for Single Axis System
The clamping bores of the linear actuator connectors GN131.1 / GN131.2 are machined and designed for construction tubings GN990 or DIN2391, DIN2395 and DIN 2462 respectively. The Polyamide bush is bonded into the sliding bore.
By means of the clamping screw on the sliding bore the movement can either be set or the slider can be clamped (after setting of final adjustment).
As a rule the sliders are only supplied assembled on a linear actuator.
The hexagon nuts DIN985 are either zinc plated or in stainless steel to suit the screws.
The standard clamping bolts are socket cap screws DIN912. They can be replaced by adjustable clamping levers GN911 (see pdf for dimensions).
Stainless Steel NI AISI CF-8 matt shot-blasted.
Clamping bores mechanically machined
Sliding bush insert Polyamide
Socket cap screws DIN912 Stainless Steel AISI 304
Hexagon nuts DIN985 Stainless Steel AISI 304
Adjustable clamping lever GN911 Inserts / Distance bushings Stainless Steel AISI 303