GN114.3 Locking Pins, with Axial Lock, Stainless Steel AISI 303
These pins with axial lock, GN 114.3, are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which often have to be removed and replaced.
The two locking pawls can be retracted by pressing the button and on releasing it the pawls will be locked again.
The rectangular shape of the locking pawls in stainless steel creates a linear contact area which gives an increased axial shear strength. The locking pins are also kept in an axial position on the bore.
The load values given in the below table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.
Plunger Pin - Stainless Steel AISI 303
Pawl - Stainless Steel AISI 304 (sheet metal)
Knob - Plastic, dark grey, temperature resistant up to 80°C
Push button - Plastic, red, temperature resistant up to 80°C
Spring - Stainless Steel AISI 301
Retaining cables GN111.2
Spiral retaining cables GN111.4