GN114.2 Locking Pin, with Axial Lock, Steel
These pins with axial lock, GN 114.2, are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which often have to be removed and replaced. The two locking pawls can be retracted by pressing the button and on releasing it the pawls will be locked again. The rectangular shape of the locking pawls in stainless steel creates a linear contact area which gives an increased axial shear strength and keep the pin in an axial position on the bore.
The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule our any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.
Pin - steel, zinc plated & blue passivated
Pawl - Stainless Steel, AISI 304 (sheet metal)
Knob - Plastic, Polyamide PA, dark grey, temperature resistant to 80°C
Push button - Plastic, Polyamide PA, red, temperature resistant to 80°C
Spring - Stainless Steel, AISI 301.
Ball chains GN111
Retaining cables GN111.2
Spiral Retaining cables GN111.4