GN114.6 Locking Pins, with Axial Lock, Stainless Steel, 1.4305
These stainless steel pins with axial lock, GN 114.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be removed and replaced often.
The rectangular pawls, made of stainless steel sheet metal, keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.
The load values given in the below table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.
Knob / Push-button / Slide - Stainless Steel, AISI 303
Plunger Pin - Stainless Steel, AISI 303
Pawl - Stainless Steel sheet metal, AISI 304
Spring - Stainless Steel, AISI 301
Ball chains GN111
Retaining cables GN111.2
Spiral retaining cables GN111.4